The Torque app, a popular choice for vehicle diagnostics, offers a basic range of monitoring capabilities using standard OBDII adapters. However, many users want to monitor more advanced parameters like fuel pressure and exhaust gas temperature (EGT). While this was previously thought impossible, PLX Devices offers a solution to unlock the full potential of the Torque app. This article will guide you through the necessary hardware and setup process to monitor EGT and fuel pressure using the PLX Kiwi 2 OBDII adapter and the Torque app.
Unlocking Advanced Data with PLX and Torque
The key to accessing advanced data lies in the unique capabilities of the PLX Kiwi 2 OBDII adapter and its companion iMFD adapter. This combination allows the Torque app to read data from external sensors, opening up a world of possibilities beyond standard OBDII parameters.
The PLX system requires a specific setup:
- PLX Kiwi 2 Bluetooth (or WiFi) Adapter: This adapter communicates with your vehicle’s OBDII port and transmits data wirelessly to your device running the Torque app.
- PLX iMFD Adapter: This crucial component bridges the gap between the Kiwi 2 and external sensors, enabling the transmission of custom data to the Torque app.
- Sensors and Modules: PLX offers a range of sensors for various parameters, including EGT and fuel pressure. Each sensor requires a corresponding module to interface with the iMFD adapter.
Installation and Configuration
Installing the sensors follows standard procedures for each specific type. The unique aspect of the PLX system is the connection of the sensor outputs to the provided module boxes. These modules are daisy-chained together, with the first module connecting to the iMFD adapter attached to the Kiwi 2. Each module requires a 12v power source, which can be conveniently tapped using an add-a-circuit with a suitable fuse.
After connecting the hardware, pair the Kiwi 2 with your device. Within the Torque app, add the custom gauges for EGT and fuel pressure. These gauges will appear in the PID list as custom entries, distinct from the standard OBDII PIDs.
Using the PLX System with Torque: Results and Considerations
With the PLX system installed, the Torque app displays real-time readings for EGT and fuel pressure, expanding its diagnostic capabilities significantly.
While the PLX system offers a powerful solution, there are a few considerations:
- Update Speed: The data update rate from the Kiwi 2 might be slightly slower compared to some other OBDII adapters.
- Occasional Errors: Some users have reported intermittent “Faulty OBDII adapter” messages, though functionality typically remains unaffected.
- Manual Power On: The Kiwi 2 might require manual powering on after a period of inactivity.
Despite these minor drawbacks, the PLX system, combined with Http Www.plxdevices.com Kiwi-2-obd2-obdii-diagnostic-scanners-s 107.htm, provides a cost-effective solution for monitoring advanced parameters like EGT and fuel pressure within the familiar Torque app environment. This setup empowers users with deeper insights into their vehicle’s performance and health, enabling more informed maintenance and troubleshooting.
